SulfiLoggerTM H2S sensor

The SulfiLoggerTM H2S sensor is an robust device for continuous liquid-phase and inline monitoring of hydrogen sulfide in rough environments. The sensor’s reliable insights enable you to adopt a proactive and data-driven approach to odor and corrosion control in wastewater, biogas, oil & gas, and other industries.

  • Measure H2S in gas, wastewater, and air

  • Continuous H2S data

Sensor models:

S1/X1-1020
(Wastewater/Air)
Price upon request
S1/X1-1120
(Biogas)
Price upon request
S1/X1-1220
(Natural gas)
Price upon request

X1 sensors for use in Zone 0 (ATEX) and Class 1 Div 1 locations (ETL).
Full certifications on sulfilogger.com/support
Sensor - Image 1
Sensor image 1 Sensor image 2 Sensor image 3 Sensor image 4 Sensor image 5 Sensor image 6

Reliable insights

Measure H2S anywhere

The robust SulfiLogger™ H2S sensor can be installed virtually anywhere in industrial applications, giving you accurate and reliable measurements to solve odor and corrosion control challenges based on data instead of hunches.

Liquid-phase

Liquid-phase
Measure directly in the liquid-phase in untreated sewage

Inline

Inline
Measure directly inline in wet process gases

Flow cell

Flow cell
Measure in a bypassed sidestream

In air

In air
Measure in ambient air

uninterrupted data

Know the H2S challenge

The sensor’s uninterrupted, continuous data provides a complete picture of how sulfide levels change over time, revealing both daily fluctuations, seasonal variations, and sudden spikes that could be missed with conventional measurement solutions.

The sensor is ideal for inline monitoring in a range of industries including…

  • Municipal wastewater
  • Industrial wastewater
  • Biogas
  • Oil & Gas
  • Produced Water
  • Pulp & Paper
  • Aquaculture
  • Industries
  • And more

Industrial companies around the world use the sensor for many applications including…

  • Finding the origin of H2S challenges
  • Short-term and permanent measurement campaigns
  • Cost-optimizing mitigation activities (i.e. dosing)
  • Avoiding odor & corrosion issues
  • Protecting equipment
  • Protecting workers
  • Documentation & compliance

Easy installation & low maintenance

Simplify the H2S monitoring setup

The SulfiLogger™ H2S sensor is designed for simple and direct installation. It can be submerged directly in raw wastewater or inserted inline in a wet gas stream with no need for complex sampling systems or gas preconditioning.

Measuring hydrogen sulfide shouldn’t be hard.

We simplify H2S monitoring setups, as the SulfiLogger™ H2S sensor can be installed inline in process gas streams without sampling or conditioning – or submerged directly in raw wastewater. All necessary mounting hardware is available.

The sensor requires only minimal maintenance to ensure reliable measurements over time. Calibration is performed once every 3 months, and is a straightforward process that is performed by the operator and taking only approx. 10 minutes to complete.

Sulfilogger™ H2S sensor

Specifications

H2S sensor models
  SulfiLoggerTM S1/X1-1020
Application Wastewater
Measurement media
  • Wastewater
  • Air
Measurement range Low range
0-0.5 mg/L
0-100 ppm
Normal range
0-5 mg/L
0-1000 ppm
Custom range
Custom measurement ranges upon request
Max pressure 3 barg (44 psig)
Operating temperature range 0 °C to +40 °C (32 °F to +104 °F)
Front design Passive anti-fouling flush front for sensor submersion
Material Stainless Steel EN 1.4404 (316L)
SulfiLoggerTM S1/X1-1120
Application Biogas
Measurement media
  • Biogas
  • Biomethane
  • CO2
  • Sludge
Measurement range Low range
0-0.5 mg/L
0-100 ppm
Normal range
0-5 mg/L
0-1000 ppm
Custom range
Custom measurement ranges upon request
Max pressure 3 barg (44 psig)
Operating temperature range 0 °C to +40 °C (32 °F to +104 °F)
Front design Threaded G 1″ (ISO 228-1, BSPP)
Material Stainless Steel
EN 1.4404 (316L)
SulfiLoggerTM X1-1220
Application Oil & gas
Measurement media
  • Natural gas
  • Oil
  • Produced water
Measurement range Low range
0-0.5 mg/L
0-100 ppm
Normal range
0-5 mg/L 0
1000 ppm
Custom range
Custom measurement ranges upon request
Max pressure 3 barg (44 psig)
Custom pressure rating upon request
Operating temperature range 0 °C to +60 °C (32 °F to +140 °F)
Front design Threaded G 1″ (ISO 228-1, BSPP)
Material Surface treated stainless steel for improved corrosion resistance
EN 1.4404 (316L)
H2S sensor models
SulfiLoggerTM S1/X1-1020 SulfiLoggerTM S1/X1-1120 SulfiLoggerTM X1-1220
Application Wastewater Biogas Oil & gas
Measurement media
  • Wastewater
  • Air
  • Biogas
  • Biomethane
  • CO2
  • Sludge
  • Natural gas
  • Oil
  • Produced water
Measurement range Low range
0-0.5 mg/L
0-100 ppm
Low range
0-0.5 mg/L
0-100 ppm
Low range
0-0.5 mg/L
0-100 ppm
Normal range
0-5 mg/L
0-1000 ppm
Normal range
0-5 mg/L
0-1000 ppm
Normal range
0-5 mg/L
0-1000 ppm
Custom range
Custom measurement ranges upon request
Custom range
Custom measurement ranges upon request
Custom range
Custom measurement ranges upon request
Max pressure 3 barg (44 psig) 3 barg (44 psig) 3 barg (44 psig)

Custom pressure rating upon request

Operating temperature range 0 °C to +40 °C (32 °F to +104 °F) 0 °C to +40 °C (32 °F to +104 °F) 0 °C to +60 °C (32 °F to +140 °F)
Front design Passive anti-fouling flush front for sensor submersion Threaded G 1″ (ISO 228-1, BSPP) Threaded G 1″ (ISO 228-1, BSPP)
Material Stainless Steel EN 1.4404 (316L) Stainless Steel EN 1.4404 (316L) Surface treated stainless steel for improved corrosion resistance
EN 1.4404 (316L)
Technical specifications
Accuracy +/- 5% of reading
Detection limit 1% of full range
Response time <25 seconds
Operating humidity range 0-100%
Max water depth 10 metres
Storage temperature range 0 °C to +40 °C (32 °F to +104 °F)
Design temperature range -20 °C to +60 °C (-4 °F to +140 °F)
Power input options
  • 4-20 mA loop power
  • DC power (12-28 VDC)
  • Batteries*
Data output options
  • 4-20 mA analogue signal
  • RS-232 digital signal
  • Cloud data*

* With the PowerCom Box only.

Mechanical & other specifications
Length 240 mm (9.4 in)
Diameter 48.3 mm (1.9 in)
Weight 0.85 kg (1.9 lb)
Warranty 2 years**
Chemical interferences specifications

** When used in accordance with the Installation Manual.

Certification
S1-series:
X1-series:

  • ETL listed (cETLus marked) to Canadian and US General Safety and Hazardous (Class l, Div. 1) Locations***
  • ATEX, UKEX, and IECEx approved for use in Zone 0 Hazardous Areas (Ex II 1G Ex ia IIC T4 Ga)***

*** SulfiLogger™ X1 only. Certificates are available on sulfilogger.com/support.

Used in +30 countries

Trusted by the industry

  • "After struggling with H₂S meters that couldn't handle moisture, the City of Grand Rapids WRRF switched to SulfiLogger.

    We now receive consistent, reliable readings, allowing us to monitor our digesters and H₂S removal media effectively. We’ve had great success with these sensors and recommend them to any facility dealing with high-moisture processes."

    City of Grand Rapids, MI
    Wastewater Operations & Maintenance Supervisor

  • "We are very satisfied with the sensor. The reliable measurement results are available to us in real time and help us to control our production efficiently and safely."

    Thyssenkrupp Electrical Steel GmbH
    Dr. Jan Mundry, Scientific Associate

  • "After installing a SulfiLogger sensor for liquid-phase measurements, we now have reliable insights into how industrial sewage discharges affect H₂S levels in the collection system."

    Energi Viborg
    Gerhard Wirenfeldt, Technical Coordinator

  • "The sensor is used in our laboratory to measure and test filter performance, helping us optimise the lifetime and effectiveness of our filters.

    The SulfiLogger sensor has significantly simplified and improved our data collection when performing H₂S tests on filters."

    Camfil AB
    Laboratory Engineer

  • "By installing SulfiLogger sensors in odor control systems in wastewater applications, we can continuously evaluate H₂S removal efficiency.

    This has improved process transparency, optimised filter operation, and enhanced overall system reliability."

    Dimtech S.A.
    Theocharis Sideris, Environmental Engineer

  • "We used to take tube measurements when something didn’t seem right, but it only gave us snapshots - not the full picture.

    With the SulfiLogger sensor’s continuous data, we now have a watchdog that alerts us if something is off. It helps us to react fast and optimize carbon filter performance, so we e.g. don’t change media too early or risk running it for too long."

    Vesthimmerland Biogas (BioCirc)
    Flemming Nielsen, Production Manager

  • "We have 4 Sulfiloggers in operation across our wastewater system. Two are used to optimise iron(II) chloride dosing in pressure pipelines, while the other two are used to monitor H₂S levels and support testing of microorganisms in the sewer system.

    Overall, the Sulfiloggers are an excellent operational tool. The data quality is outstanding, maintenance is extremely easy, and after more than a year of continuous operation, we have not noticed any significant wear."

    Wolfburger Entwässerungsbetriebe
    Thomas Rechlin, Head of Department for Treatment Plants and Pumping Stations

  • "We use two SulfiLogger sensors (one placed in the liquid and one in the air) to investigate a location, where we have a suspicion of elevated H₂S levels.

    The measurement data is crucial for assessing the severity of the problem and selecting the appropriate solution. If the results confirm our suspicions, we will explore the possibility of a filtration solution or other relevant mitigation measures.

    After this project, we plan to relocate the sensors to other locations within the sewer network where hydrogen sulfide also is suspected."

    SonFor
    Thor Krogh Harfot, Maskinmester

  • "We have successfully deployed SulfiLogger sensors across diverse applications, including drinking water reservoirs, irrigation wells, industrial and municipal wastewater systems, and landfill leachate.

    The technology has proven consistently reliable, delivering accurate, real-time sulfide data that enhances system understanding and supports process optimization. The sensors’ robustness and durability under varied field conditions have been particularly impressive."

    Nanoplus Limited
    Raphi Mandelbaum, Managing Director

PRICING

Request sensor pricing

The price of a SulfiLogger™ H2S sensor system depend on your specific application, which impacts which sensor configuration and what pieces of mounting hardware is required. Therefore, before we can give you a quote, we need to understand your application.

 

How do I see the price?

1. Fill out the form
Let us know a bit about your application.
2. We get back to you
We follow up and ideally arrange an online meeting to clarify your requirements and find the right sensor for your application.
3. Receive a quote
We send you a quote with specific pricing tailored to your requirements.